MHK0120 Introduction to mechatronics , 6.0 ECU
The content of the course is reflected by competencies of which anyone is associated with amount of credit units.
Each competency skills are measured by ability levels in the range 0..127. During studying results of every action (e.g. solving tasks) are automatically evaluated and ability levels and forgetting speed
levels are adjusted. Decisions (concering grade and crossing the critical threshold of 77) are based on ability levels which are predicted for 16 weeks into the future.
A learner has all the time full picture about ability levels in the form of a competence map , for particular course, sum of credit units for abilities that have reached the critical level 77, the amount of credit units confirmed in class tests and a graph representing achieving final grade as a plot in coordinates credit units vs ability levels.
Grade zones combined from credits and ability levels are shown as an example in Figure. Vertical axis represents ability levels and credit units are on horizontal axis.
Yellow line — shows confirmed states and its right end marks available grade. Black line — shows my current state if all the competences done would be confirmed.

Course MHK0120 , having description in ois is divided into following competences: (1ECU=1000mECU)
A learner has all the time full picture about ability levels in the form of a competence map , for particular course, sum of credit units for abilities that have reached the critical level 77, the amount of credit units confirmed in class tests and a graph representing achieving final grade as a plot in coordinates credit units vs ability levels.
Grade zones combined from credits and ability levels are shown as an example in Figure. Vertical axis represents ability levels and credit units are on horizontal axis.
Yellow line — shows confirmed states and its right end marks available grade. Black line — shows my current state if all the competences done would be confirmed.

Course MHK0120 , having description in ois is divided into following competences: (1ECU=1000mECU)
Competence | mECU |
---|---|
Acceleration | 70 |
acceleration of gravity | 70 |
ADC | 100 |
AND | 60 |
Angular velocity | 70 |
Arduino - actuators | 70 |
Arduino - analogRead | 70 |
Arduino - analogWrite | 70 |
Arduino - coding error | 70 |
Arduino - communication | 70 |
Arduino - connections | 70 |
Arduino - datatypes | 70 |
Arduino - digitalRead | 70 |
Arduino - digitalWrite | 70 |
Arduino - programming | 70 |
Arduino - sensors | 70 |
Average square | 90 |
Baud | 65 |
Bit2Byte | 60 |
Byte2Bit | 60 |
communication speed | 65 |
Cosine Theorem | 50 |
Dec2Binary | 60 |
Dec2Hex | 80 |
Diode | 60 |
Diodes in series | 90 |
Feedback | 70 |
friction | 70 |
Hex2Dec | 50 |
inclined surface | 70 |
Incoming current equals to outgoing | 50 |
Lab Current divider | 90 |
Lab Current measurement | 80 |
Lab Incoming current equals to outgoing | 90 |
Lab Measuring, Digital meter | 90 |
Lab Multimeter: DC value and accuracy | 110 |
Lab Resistance unit | 80 |
Lab Resistors in series | 90 |
Lab Voltage divider | 90 |
Lab Voltage sum in loop is zero | 90 |
Lab Voltage unit | 80 |
LED | 70 |
Line velocity | 70 |
Measuring analog meter | 100 |
Mechanical Balance | 65 |
Mechatronics HomeWork | 1500 |
Moment of inertia | 70 |
Moving distance | 80 |
Multimeter, AC voltage | 50 |
Multimeter, DC current | 50 |
Multimeter, DC voltage | 50 |
Multimeter, resistance | 80 |
NAND | 80 |
NOR | 70 |
NOT | 70 |
OpAmp amplifier | 50 |
OR | 60 |
Prefix | 80 |
RMS: rectangular | 80 |
Rotary Encoder | 80 |
Rotation | 80 |
Signal flow graph, no loop | 90 |
Signal flow graph, one loop | 80 |
Signal flow graph, two loops | 90 |
SignedByte2Dec | 60 |
Torgue | 70 |
Transmission | 70 |
US units | 70 |
Vector | 80 |
velocity | 70 |
Vernier scale | 60 |
Voltage measurement | 90 |
Voltage sources in series | 90 |